Micro-Mesh Abrasives

Micro-Surface makes the finest sandpaper around: Micro-Mesh abrasives. I originally used their sanding pads to get a perfect finish on a plastic model car by sanding each layer of spraypaint I applied to the model. Their finest sandpaper is rated at an incredible 12000 grit. (Although that number isn’t using the same ANSI scale as commonly available sandpaper).

I was amazed that I was able to sand a scratched plastic window to perfect clarity, although I shouldn’t have been surprised: micro-mesh is used to repair the acrylic windows used on many airplanes. I’ve since used the same hobby kit for repairing scratches in the clear coat of my REAL car. I’ve even carefully polished out deep scratches in the bottom of several CDs. You can also polish out scratches on reading glasses.

Micro-Surface makes a wide variety of abrasives, in every size and type I can imagine needing.

-- Mike Gebis  

Micro-Mesh Abrasives Kits
$19+
Avialable from Micro-Surface Finishing Products

20X Sandpaper 400 grit       20X Micro-Mesh 1500 Micro-Mesh is what we like to call a non-abrasive abrasive. It is considered a cushioned abrasive in fact. Conventional sandpaper is designed to be aggressive so that it will dig deeply. In its manufacture the crystals are electrically charged so that they will stand up. They are locked into a hard resin and when you apply the paper to a surface it will literally tear in and remove the substrate of the material you are sanding. The crystals cut in a negative raking motion, leaving inconsistent scratch patterns. Micro-Mesh does the opposite. The backing is long lasting cloth to which an ultra-flexible cushioning layer is applied. This cushioning layer will determine how far forward you can push crystals before they will penetrate the cushioning layer. On top of this layer, we have a very resilient glue, not a hard resin, but a completely flexible glue that will hold the crystals while allowing it to move and rotate. The crystals can turn in any direction without coming loose. When you start to apply pressure to sand with Micro-Mesh, the crystals will go into the cushioning layer while beginning to cut a bit. If you push harder, they will go further into the cushioning layer, which serves as a safety valve. It determines how much pressure you can exert in a downward direction. Instead of a deep scratch that sandpaper makes, Micro-Mesh produces a refined scratch that is close to a RMS of 1.0. The cushioning layer also allows the crystals to cut with a planing motion that leaves an extremely consistent scratch pattern and allows you to achieve extraordinary levels of gloss.