• Crane/etc to lift objects from car trunk?

    Answers Given

    Answers Favorited

  • I'd like a tool for lifting 100-200lb objects from a car trunk. Perhaps something like an engine hoist? It needs to be small and/or 'foldable' so it can be stored on a garage wall or shelf. Designs for DIY contraptions using rope/pulleys/etc are welcome, as are commercial products. Thanks

    8 0
    Question by 222fbj
    03/29/2012

You could rig two double or triple blocks & tackle to lift heavy objects (see link below), can't beat this system for portability and utility. If you have a stationary frame to hook the top block from (like a steel beam or wood frame) you should be all set...otherwise you'd have to build a large tripod or other structure to support the blocks. Hope this helps.

http://goo.gl/rDHwJ

Answer by mrgripe
04/16/2012

This is a solution used by wood turners to get logs in and out of their truck beds. It could easily used in a car trunk or suv back end. I have seen them but do not own one. It does require a trailer hitch. The trailer jacks and the crane are not too expensive, the welding ...YMMV As described it will store pretty easily. http://www.woodcentral.com/cgi-bin/readarticle.pl?dir=turning&file=articles_594.shtml

Answer by markwoll
04/23/2012

How often are you doing this? If it is a daily occurrence is s small pickup, SUV, or minivan a better vehicle for you? A vehicle with a full accessible hatch/flatbed storage would be easier to load and unload using ramps if needed, but you can't get around the lifting with a trunk.

Answer by rkt88edmo
06/06/2012

"100-200lb objects" eh? Why not just, er, separate the major components and lift them out individually? That way you can dig smaller holes to dispose of them. 5 or 6 trips should see the job completed.

Answer by grod
06/06/2012

An engine hoist may be the easiest general-purpose solution (or equivalent — I have a medical lift that's the same design with a hand-operated hydraulic ram to raise a boom).

Simple machines and your brain are probably the first tools to consider. Can you put the objects onto a wheeled platform then use a ramp? Can you use a lever (or put something under the objects with extended arms to add leverage)?

Answer by jolshefsky
06/07/2012

A lift table. Here is a very inexpensive one from Harbor Freight:

http://www.harborfreight.com/500-lb-capacity-hydraulic-lift-table-94822.html

Answer by wherephone
06/07/2012

Habor Freight has a number of useful tools to solve this problem. The first thing that flies to mind is the 1-ton shop crane:

http://www.harborfreight.com/1-ton-capacity-foldable-shop-crane-93840.html

You might also consider the electric hoist with remote control, though it would require professional installation:

http://www.harborfreight.com/110-volt-440-lb-capacity-electric-hoist-with-remote-control-40765.html

If you don't need or want the electric option, they have a variety of manual chain hoists, e.g.:

http://www.harborfreight.com/1-ton-chain-hoist-996.html

Answer by Bill Horvath II
06/10/2012

This has really been bugging me...my instinct is to answer "a bunch of guys" but that's not reliable or realistic.

What I keep coming back to is a Gantry Crane. While a bunch of guys would be best for loading and unloading a car trunk, something simple & lightweight might be what you're looking for.

Here's something you might be able to model something suitable for your purposes.

Answer by wayne ruffner
06/24/2012
« Back to Previous Page
Cool tools really work.

A cool tool can be any book, gadget, software, video, map, hardware, material, or website that is tried and true. All reviews on this site are written by readers who have actually used the tool and others like it. Items can be either old or new as long as they are wonderful. We post things we like and ignore the rest. Suggestions for tools much better than what is recommended here are always wanted.

Tell us what you love.