login ask-a-question questions unanswered tags faq

I have 2 folding pocket knives that I carry and use everyday. I've been periodically spraying WD-40 on them, but I know there's better stuff out there. But which is the best?

asked Jan 06 '12 at 19:56

spyderstuck's gravatar image

spyderstuck
1


12next page »

I have been using a "dry" bicycle lube with good results. I use Finish Line Dry Teflon, but there are many others. My thinking is that a "wet" lube like mineral oil and WD-40 will pick up pocket lint and grit, which will eventually suck out the oil and leave the joint dry. A dry lube is designed not to pick up that junk. You can get it at any bike store; just ask for a dry lube. Just a drop or two will last a long time, and the stuff is cheap.

link

answered Nov 25 '12 at 18:51

KokoTheTalkingApe's gravatar image

KokoTheTalkingApe
16

For purposes of of lubricating the hinges of pocket/folding knifes/tools: I have had good luck using "M12 Kellube". See http://www.dawsonprecision.com/ProductDetail.jsp?LISTID=CF0001-1095452308

Kellube is intended for use as a gun lubricant. I claim, based on the extensive testing that gun lubricants receive and the similarity of the lubrication/dirt resistance requirements for gun and knife hinges, that this type of lubricant is ideally suited for this purpose.

Prior to applying the lubricant, use some sort of compressed air (e.g. Radio Shack Dust Remover Spray) to "blast-away" the dirt & grit that has accumulated in the hinge. Use only one very small drop of lubricant per hinge side. The thin needle applicator on the Kellube container makes this easy. A 1 oz. container may last the rest of your life.

link

answered Nov 24 '12 at 16:11

ThurstonBT's gravatar image

ThurstonBT
1

CLP as mentioned above is great for all around use but not food grade (as also hinted at above). People love to crap on WD40 but it's a great water excluder so if you plan to lube frequently and it's what you already have it's fine and you'll have zero problems. Large amounts of anything liquid will only attract crud to your pivot, so using a q-tip saturated in your oil of choice is a nice way to control application.

link

answered Nov 24 '12 at 01:27

chunk's gravatar image

chunk
16

White Lightning is a liquid lubricating wax I've used before. It's great, dries and stays, won't leak off into the material of your clothes and lubes nicely. I've been working on the same bottle for about 8 years!

link

answered Jan 16 '12 at 22:32

Rob%20Feeny's gravatar image

Rob Feeny
16

Silicone lubricants would probably work well and they won't likely cause an oily spot on your clothes.

link

answered Jan 16 '12 at 22:18

Moe%20Rubenzahl's gravatar image

Moe Rubenzahl
1

I primarily use stainless steel pocket knives as my every day carry knife. As such, I don't need to worry about oiling the blade. I still do sometimes (out of habit), but I don't need to. The knives I get tend to have good bearings/swivels as well and don't need much maintenance. On my carbon steel blades I use a variety of oils. For display/heirloom/investment knives I use break-free clp. I've never found a better way to keep guns or knives from corroding. For other knives, that I might end up eating with or using, I use mineral oil or 3-in-1. It's a rarity when I use one of them for food, so I'm not worried about a little 3-in-1. It builds character.

link

answered Jan 14 '12 at 10:02

Derek%20Murawsky's gravatar image

Derek Murawsky
241

I've been using Victorinox Multi Tool Oil for quite some time on all of my folding knives/tools. http://bit.ly/Ana0JT Comes in a small handy container. Lasts for months. One drop on every hinge is all you need.

link

answered Jan 12 '12 at 20:25

gollumlopez's gravatar image

gollumlopez
1

Sentry Solutions makes a lube that drys completely and works great.

link

answered Jan 11 '12 at 15:43

AGL%20Bob's gravatar image

AGL Bob
1

+1: Food grade mineral oil so I can use it to cut food. It never sits long anyway.

link

answered Jan 09 '12 at 17:40

fredellarby's gravatar image

fredellarby
1

A single drop of 3-in-1 oil works wonders. Half a drop if you can manage it. I have also used sewing machine oil and hair clipper oil with great success. One drop should last 6 months. Any lighter oil will just evaporate.

link

answered Jan 09 '12 at 14:38

Thomas%20Linton's gravatar image

Thomas Linton
16

Your answer
toggle preview

Follow this question

By Email:

Once you sign in you will be able to subscribe for any updates here

By RSS:

Answers

Answers and Comments

Markdown Basics

  • *italic* or __italic__
  • **bold** or __bold__
  • link:[text](http://url.com/ "title")
  • image?![alt text](/path/img.jpg "title")
  • numbered list: 1. Foo 2. Bar
  • to add a line break simply add two spaces to where you would like the new line to be.
  • basic HTML tags are also supported

Tags:

Asked: Jan 06 '12 at 19:56

Seen: 18,869 times

Last updated: Nov 25 '12 at 18:51

Related questions

powered by OSQA