login ask-a-question questions unanswered tags faq

I'm looking for a method to label mason jars or bottles that does NOT involve adhesive. No sticker-type labels. I don't have the patience to remove adhesive labels, so I'm trying to avoid needing to do that. So I'm looking for some combination of rubberband+cardstock or maybe someone could recommend a pen that writes well on glass and is long-lasting (but removable).

asked Apr 06 '11 at 19:38

camille's gravatar image

camille
1355

edited May 10 '11 at 17:16

I may have found a workable solution, at least for anything that has a metallic lid. I've found you can use a magnet to attach a label to the lid. The small Mighty Magnets work pretty well and come in a variety of shapes (some are easier to grab than others). For the labels, the backside of the cardboard that's used for 6-packs works great -- I cut out 2"-diameter circles to fit nicely inside the decorative print on the mason lid. Still would love to hear other ideas though.

3 years, 4 months ago
camille's gravatar image camille

12next page »

How about one of those pencils made to write on photographs?

link

answered May 11 '11 at 10:41

bookofjoe's gravatar image

bookofjoe
61

You mean like a grease pencil? That might just work!

3 years, 3 months ago
camille's gravatar image camille

How about using a water-soluable pen (like an overhead pen) and a static cling label like the ones they use for oil-change reminders? They stick reliably in a pretty harsh environment (sun + hot) for 6+months and yet remove easily.

I'd write with the overhead pen, then cover it with the label to keep from smearing.

Office depot seems to sell inkjet-printable ones. I would worry that this would make the ink permanent rather than reusable, but maybe that is only on one surface or you could remove the ink-capturing coating (assuming it's a coating).

You could just print on the labels and reuse, if you can a specific set of items.

link

answered May 24 '11 at 00:13

A%20Person's gravatar image

A Person
31

We use day dots similar to these at my job. They are nice and adhesive, but also water-soluble, so they just magically go away in the dishwasher. These are the 1"x2" ones, but they have different sizes, and can be found online or in food service supply catalogs for cheaper.

https://www.daydots.com/article.asp?HKEY=002&strPRODH=001001009&strMATNR=11009-00-00&page=1

link

answered May 25 '11 at 07:29

jmello's gravatar image

jmello
46

These look amazing! Are there any other uses outside of the food industry?

3 years, 3 months ago
oliver's gravatar image oliver

Interesting. My only concern is what happens to the labels after the come off in the dishwasher? Dont they gunk up the drain?? If the labels come off with a bit of faucet water, that might work.

3 years, 3 months ago
camille's gravatar image camille

I have no experience with canning, but you could order wider rubber bands and write labels in pen on those and slip them over the jar. The bonus is that if you place it at the widest point on the jar it will reduce clinking/breakage during storage. And they would be reusable!

Staples carries 1/4 pound of these 1/2" wide rubber bands for $2. (Anybody know why they measure rubber bands by weight?)

link

answered May 02 '11 at 18:22

oliver's gravatar image

oliver
611

This is a great idea! Thanks, Oliver.

3 years, 4 months ago
camille's gravatar image camille

I use freezer tape. I find it is easy to remove because it doesn't tear like a label would. To make it even easier to remove just fold one end of the tape into a tab. It is adhesive, but it not difficult to remove which seems to be the primary intent of the question.

link

answered May 25 '11 at 10:22

Monty's gravatar image

Monty
16

sharpie can be removed with either acetone or alcohol (so use nailpolish remover or vodka)

link

answered May 26 '11 at 04:13

brick66's gravatar image

brick66
16

I use Weck jars

link

answered Apr 25 '11 at 16:56

wbremser's gravatar image

wbremser
1

How does labeling work with the Weck jars?

3 years, 4 months ago
camille's gravatar image camille

Yes, that's precisely what I meant: I couldn't think of the name off the cuff. Old age isn't pretty....

link

answered May 11 '11 at 10:54

bookofjoe's gravatar image

bookofjoe
61

KISS-Just use a sharpie, it is a good compromise which is what you are asking for.

link

answered May 24 '11 at 07:07

QUAIL333's gravatar image

QUAIL333
1

I would suggest grease pencil (aka china marker). It makes a waxy mark that won't go away if it just gets wet, but it can be removed with by rubbing with a paper towel and/or using a solvent after the mark has been on the glass for a long time.

link

answered May 25 '11 at 16:48

jessa's gravatar image

jessa
1

Your answer
toggle preview

Follow this question

By Email:

Once you sign in you will be able to subscribe for any updates here

By RSS:

Answers

Answers and Comments

Markdown Basics

  • *italic* or __italic__
  • **bold** or __bold__
  • link:[text](http://url.com/ "title")
  • image?![alt text](/path/img.jpg "title")
  • numbered list: 1. Foo 2. Bar
  • to add a line break simply add two spaces to where you would like the new line to be.
  • basic HTML tags are also supported

Tags:

Asked: Apr 06 '11 at 19:38

Seen: 7,527 times

Last updated: Nov 20 '12 at 00:23

powered by OSQA