• What's the best oil for a pocket knife?

    Answers Given

    Answers Favorited

  • I have 2 folding pocket knives that I carry and use everyday. I've been periodically spraying WD-40 on them, but I know there's better stuff out there. But which is the best?

    12 0
    Question by spyderstuck
    01/06/2012

put only edible oil on it! a knife is used to cut food, it's useless if you sprayed toxic products on the blade.

Answer by marclacoste
01/09/2012

I'm sure this has been pointed out here before, but I'll say it again: WD-40 is a solvent, not a lubricant. Use it to loosen a rusty bolt. If you want to lubricate and/or protect something, use oil. Mineral oil works quite well for blades.

Answer by modernyeti
01/09/2012

A single drop of 3-in-1 oil works wonders. Half a drop if you can manage it. I have also used sewing machine oil and hair clipper oil with great success. One drop should last 6 months. Any lighter oil will just evaporate.

Answer by thomas linton
01/09/2012

+1: Food grade mineral oil so I can use it to cut food. It never sits long anyway.

Answer by fredellarby
01/09/2012

Sentry Solutions makes a lube that drys completely and works great.

Answer by agl bob
01/11/2012

I've been using Victorinox Multi Tool Oil for quite some time on all of my folding knives/tools. http://bit.ly/Ana0JT Comes in a small handy container. Lasts for months. One drop on every hinge is all you need.

Answer by gollumlopez
01/12/2012

I primarily use stainless steel pocket knives as my every day carry knife. As such, I don't need to worry about oiling the blade. I still do sometimes (out of habit), but I don't need to. The knives I get tend to have good bearings/swivels as well and don't need much maintenance. On my carbon steel blades I use a variety of oils. For display/heirloom/investment knives I use break-free clp. I've never found a better way to keep guns or knives from corroding. For other knives, that I might end up eating with or using, I use mineral oil or 3-in-1. It's a rarity when I use one of them for food, so I'm not worried about a little 3-in-1. It builds character.

Answer by derek murawsky
01/14/2012

Silicone lubricants would probably work well and they won't likely cause an oily spot on your clothes.

Answer by moe rubenzahl
01/16/2012

White Lightning is a liquid lubricating wax I've used before. It's great, dries and stays, won't leak off into the material of your clothes and lubes nicely. I've been working on the same bottle for about 8 years!

Answer by rob feeny
01/16/2012

CLP as mentioned above is great for all around use but not food grade (as also hinted at above). People love to crap on WD40 but it's a great water excluder so if you plan to lube frequently and it's what you already have it's fine and you'll have zero problems. Large amounts of anything liquid will only attract crud to your pivot, so using a q-tip saturated in your oil of choice is a nice way to control application.

Answer by chunk
11/24/2012

For purposes of of lubricating the hinges of pocket/folding knifes/tools: I have had good luck using "M12 Kellube". See http://www.dawsonprecision.com/ProductDetail.jsp?LISTID=CF0001-1095452308

Kellube is intended for use as a gun lubricant. I claim, based on the extensive testing that gun lubricants receive and the similarity of the lubrication/dirt resistance requirements for gun and knife hinges, that this type of lubricant is ideally suited for this purpose.

Prior to applying the lubricant, use some sort of compressed air (e.g. Radio Shack Dust Remover Spray) to "blast-away" the dirt & grit that has accumulated in the hinge. Use only one very small drop of lubricant per hinge side. The thin needle applicator on the Kellube container makes this easy. A 1 oz. container may last the rest of your life.

Answer by thurstonbt
11/24/2012

I have been using a "dry" bicycle lube with good results. I use Finish Line Dry Teflon, but there are many others. My thinking is that a "wet" lube like mineral oil and WD-40 will pick up pocket lint and grit, which will eventually suck out the oil and leave the joint dry. A dry lube is designed not to pick up that junk. You can get it at any bike store; just ask for a dry lube. Just a drop or two will last a long time, and the stuff is cheap.

Answer by kokothetalkingape
11/25/2012
« Back to Previous Page
Cool tools really work.

A cool tool can be any book, gadget, software, video, map, hardware, material, or website that is tried and true. All reviews on this site are written by readers who have actually used the tool and others like it. Items can be either old or new as long as they are wonderful. We post things we like and ignore the rest. Suggestions for tools much better than what is recommended here are always wanted.

Tell us what you love.

CATEGORIES





creative commons