Street Use

Massive Electric Bike Motor Modification


Sculpturer Eric Peltzer has built his own electric mountain bike using a huge go-kart motor. He writes on his blog: “The reason for this powerful a motor is simple: hills. I live on a steep hill. While a Zap or a US ProDrive rated at 400 watts goes a decent 17 mph on flat land, they slow to 3 to 5 mph on a decent hill. I can pedal that fast. However I wanted to go faster and be able to get up a hill. The simple fact is that you need from 5 to 10 times as much power to go a given speed on a decent grade. This is why a car that only needs 12 hp to go 60 mph on flat roads has an engine that can put out 100 to 200 hp.”

Ebike51

Ebike53

A separate independently created home-made electric bike, found on Flickr (via Makezine). Don’t know much about it, other than it was made by Pete Green and uses a 350W motor.

Bike

Posted on November 7, 2006 at 4:41 pm | comments



Comments
  • Brent

    on and off worked fine for me! this was using the c5 motor, i found a 70amp relay and with a burn-coast usage it worked fine.

  • Matt

    very nice. i motorised a old bike but i removed the padals and cranks so it was a proper motorbike. it was powered by a lwanmower engine with 950 watts of power. it eaisilt hit 30mph and ran nicley around 40mph. it no longer works as the engine overheated to many times so im going to fit a sinclare c5 motor to it instead. i was wondering how you controll the speed of the motor and if i can just have it on or off. thanks

  • Andrew

    You control the motor with a pulse width modulating speed controller. A bit expensive, but worth it. look it up.

  • sanh

    Question…Is it legal to ride a convert 3 hp off road minibike to a mountain bicycle?