I’d seen these scrapers for years and always figured them to be a gimmick, just a glorified putty knife. Then a friend helped me with a roofing project and brought one along. The more I used it, the more I came to see it as the single most handy, versatile and cheapest jobsite tool I’ve found. The basic functions: scraper, putty knife, chisel, pick, paint roll cleaner (squeegee).<\/p>\n
I have probably a dozen of them floating around right now, always one or two on a jobsite. At a buck or so a piece, they are an incredible bargain. The pointy end does a great job of cleaning out crevices, scraping off excess glue or weld slag, prying up staples and getting into tight places. Makes a great little pry bar for wood trim. They can be used as a wedge and make a dandy temporary door stop\/door hold open. The point can double as a Phillips screwdriver in a pinch. The flat side does a great job of opening cans. Sharpened up, the large flat blade can be used as a wood scraper or wood chisel. Great for those places where you may hit metal and don’t want to trash a good chisel.<\/p>\n
You can also customize them for specific tasks easily by filing or grinding them down if, say, you’re refinishing and need a specific-sized scraper for the trim or you want to sharpen one side to a near-razor edge. I have seriously beat on these with a hammer and never had one shatter or snap. But they don’t bend like a cheap screwdriver when prying with them. The steel is high-quality enough to do the task — quite stiff and does not bend easily at all — but still relatively easy to work with, file, etc.<\/p>\n
I’ve had more expensive versions and cheaper ones and there isn’t a noticeable amount of difference in the tools. I prefer the Dollar Store ones with the wood handle (great for hammering cans closed, etc.), but the scrapers with the nylon handle (below) are also sufficient.<\/p>\n","protected":false},"excerpt":{"rendered":"
Cheap painter\/roofer’s multi-tool<\/p>\n","protected":false},"author":4,"featured_media":0,"comment_status":"open","ping_status":"0","sticky":false,"template":"","format":"standard","meta":{"_monsterinsights_skip_tracking":false,"_monsterinsights_sitenote_active":false,"_monsterinsights_sitenote_note":"","_monsterinsights_sitenote_category":0},"categories":[19],"tags":[1350],"acf":[],"_links":{"self":[{"href":"https:\/\/kk.org\/cooltools\/wp-json\/wp\/v2\/posts\/3444"}],"collection":[{"href":"https:\/\/kk.org\/cooltools\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/kk.org\/cooltools\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/kk.org\/cooltools\/wp-json\/wp\/v2\/users\/4"}],"replies":[{"embeddable":true,"href":"https:\/\/kk.org\/cooltools\/wp-json\/wp\/v2\/comments?post=3444"}],"version-history":[{"count":0,"href":"https:\/\/kk.org\/cooltools\/wp-json\/wp\/v2\/posts\/3444\/revisions"}],"wp:attachment":[{"href":"https:\/\/kk.org\/cooltools\/wp-json\/wp\/v2\/media?parent=3444"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/kk.org\/cooltools\/wp-json\/wp\/v2\/categories?post=3444"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/kk.org\/cooltools\/wp-json\/wp\/v2\/tags?post=3444"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}