Become a Patron!Support our reviews, videos, and podcasts on Patreon!
Cool tools really work.
A cool tool can be any book, gadget, software, video, map, hardware, material, or website that is tried and true. All reviews on this site are written by readers who have actually used the tool and others like it. Items can be either old or new as long as they are wonderful. We post things we like and ignore the rest. Suggestions for tools much better than what is recommended here are always wanted.
These plastic quick connects from Melnor are the gobetweens for the hose and whatever nozzle, sprinklers or other hose-end attachments you may have. They’re especially good for quickly moving and attaching hoses from one faucet to another. I installed them on ALL my faucets (5) and hoses (perhaps 7) and external attachments (probably 10). I have used them for about a year and wonder how I ever got along without them. It takes less than a second (maybe 1/2 second) to attach or detach any hose or attachment. They are installed in pairs, a male and corresponding female connector, with the appropriate threaded fitting to attach to the faucet, hose or nozzle attachment, one on each side of the connection. You just firmly push the connector into its counterpart, and it easily pops into place — firmly means it does need a little pressure, but even a small child could do it. To disconnect, you push the green collar about an eighth of an inch in the one direction it’s capable of moving, and it pops off. (Similar devices have been in use in industry for a long time — on compressed air lines, for example). No more screwing and unscrewing (no more scraped knuckles); no more leaks from incompletely tightened hoses; no more stuck connections because some gorilla (i.e. me) tried to stop a leak by tightening too hard.
One type is designed so that when you disconnect from it, an internal plug pops into place and stops water from coming out. The other type, for between a faucet and hose, does not have the shutoff. When you disconnect the hose from the faucet, water will still flow and the faucet can still be used. There are other brands and styles; some are even made of pricier brass, but I recommend you stick with one manufacturer because connectors are generally not interchangeable between brands. And these inexpensive plastic ones from Melnor are well made: I have (intentionally) very high water pressure (~100 psi, sufficient to burst hoses) on my garden faucets, and I have had no leaks from these connectors. — Robert Ando
We are lucky to have a few apple & peach trees, but they have to be sprayed to insure tasty fruit. Trouble is some are about 20 feet high. I tried a bunch of sprayers, all poor performers, until I discovered the Hudson Trombone Tree Sprayer. It works like using a trombone and throws a great spray — they claim to around 25 feet high and that looks about right. A connecting hose maybe 7-8 feet long rests with a sort of small shower-head-like filter in the bottom of a bucket (not provided).
It uses plain old arm power. You feel like Elliot Ness in the “Untouchables” wielding a Tommy gun, but it works great, is only about $40 (get the one with the two gun grips) and even builds up your forearms and shoulder muscles. It’s also got an adjustable nozzle to adjust spray. It really throws a good heavy directed or dispersed spray; I’m surprised at how much more quickly it gets the job done. Way outperforms pump-up pressure tank ones. — Vince Crisci
These brass connectors are MUCH better than the plastic Melnor Quick Connects.
These little brass hose connectors make the job of attaching and detaching hoses quick and simple. You pull the collar back on the female connector, and insert the male connector, and you’re ready to roll. Really, it just takes a second or two to provide a secure, leak-proof connection. There are several brands of cheap plastic connectors out there, but these brass ones will last a lifetime. I have a number of them that are 10+ years old, and they work amazingly well. I attach these to everything hose-related: faucets, both ends of the hoses, and all the attachments, and they save me a lot of time and annoyance.
There are two drawbacks to these connectors: people unfamiliar with them will unscrew the whole set up, so if you have handymen, contractors, or yard men who are going to deal with your hoses, you’ll need to explain how they work. The second is that they’re easily lost and misplaced. Even though these connectors are easily lost, they’re so long-lasting and sturdy that when they turn up again, they’ll work perfectly! — Amy Thomson
I have used Dramm Fogg-it hose nozzles ($12) for a variety of watering and irrigation purposes for more than ten years. They deliver a fine mist of water and are available in different strengths, measured as gallons per minute: ½ GPM, 1 GPM, 2 GPM and 4 GPM. I’ve used all but the 4 GPM model. The ½ GPM nozzle, attached to a wand, is perfect for laying down a fine mist of water on a hot deck to cool things down using a minimal amount of water. You can also water very fragile seedlings, or mist cuttings with it. I use the 1 GPM nozzle for watering seedlings and seed beds. The 2 GPM nozzle is great for general watering of established plants. The fine mist will not break down soil structure, and delivers slowly enough for the soil to take in the moisture without run-off.
I like the fact that I can tweak the flow rate by switching nozzles. If one takes too long, I use a nozzle with a higher flow rate. Or if the spray is damaging tender seedlings, then I use a more gentle nozzle. The fine spray is also a great way to revive a heat-wilted plant.
These nozzles are solid brass, tough and well made. I toss them around mercilessly. Also, mine have never clogged. They fit onto a standard ¾-inch fitting, so you can screw them onto your hose, or any water wand with a hose fitting. Their only drawback is that they’re small enough to get lost easily. — Amy Thomson
This is a heavy-duty cast aluminum garden hose reel. It costs about twice as much as the plastic reel I replaced and is at least four times the quality and longevity. The materials used are thick cast aluminum, powder-coated, with real stainless steel fasteners and brass fittings. The fittings and bearings are replaceable and heavy duty. The term bulletproof comes to mind.
The reel is configurable as a parallel or perpendicular mount with either a right or left hand hose mount. The design is modular and well thought out. Even the included hex wrenches are well thought out and long enough to reach easily and are of high quality. As a mechanical designer myself, I am able to appreciate a nice robust design and execution. — Jack Kellythorne
I spent 20 hours researching garden hoses and discovered that the 50-foot Craftsman Premium Rubber Hose for $40 is the best choice for a garden hose. It is built like a tank -- heavy rubber construction and nickel plated brass connectors. It should last years if cared for properly. Not only is it affordable, but it comes with a lifetime warranty that covers you when, not if, the hose eventually breaks. — Oliver Hulland
Once a week we’ll send out a page from Cool Tools: A Catalog of Possibilities. The tools might be outdated or obsolete, and the links to them may or may not work. We present these vintage recommendations as is because the possibilities they inspire are new. Sign up here to get Tools for Possibilities a week early in your inbox.
