Gareth’s Tips

Mixing up the right amount of resin is a trial no more. 07/30/20

Calculating How Much Epoxy You Need

Gareth’s Tips, Tools, and Shop Tales – Issue #55

Put a VFD on it. 07/23/20

Running 3-Phase Machines in a Single-Phase Shop

Gareth’s Tips, Tools, and Shop Tales – Issue #54

07/9/20

Sharpening Spade Bits

Gareth’s Tips, Tools, and Shop Tales – Issue #53

07/2/20

Using Clamps to Spread Things Apart

Gareth’s Tips, Tools, and Shop Tales – Issue #52

tipsmydad 06/25/20

“Tips My Dad Says” 2020 Edition

Gareth’s Tips, Tools, and Shop Tales – Issue #51

Crappy brush? Try polishing the needle. 06/18/20

Improving a Cheap Airbrush

Gareth’s Tips, Tools, and Shop Tales – Issue #50

Making a good impression. 06/11/20

Quick Molding with Sugru

Gareth’s Tips, Tools, and Shop Tales – Issue #49

Bubble, bubble, toil and trouble. 06/4/20

Five Ways to Remove Bubbles from Epoxy Resin

Gareth’s Tips, Tools, and Shop Tales – Issue #48

Organize your gear with DIY ties. 05/28/20

Making Your Own Gear Ties

Gareth’s Tips, Tools, and Shop Tales – Issue #47

When possible, hang it where you need it. 05/21/20

A Place to Hang Your Sled

Gareth’s Tips, Tools, and Shop Tales – Issue #46

A complex part bent into shape using 3D-printed dies. 05/7/20

Using a 3D-Printed Die to Bend Sheet Metal Parts

Gareth’s Tips, Tools, and Shop Tales – Issue #45

A lovely, fancy version of an easy-to-make wire clamping tool. 04/30/20

Making a Wire Clamper

Gareth’s Tips, Tools, and Shop Tales – Issue #44