NuGuard GripStand 3
Rugged iPad case with removable stand
[UPDATE – ITEM IS CURRENTLY OUT OF STOCK ON AMAZON.] I have tried many cases for my iPad but the NuGuard GripStand 3 is by far my favorite. It is composed of a protective case and a handle that acts as the base. The outside shell consists of a hard plastic with several parts sculpted out to permit access to all the ports and buttons on your iPad as well as a spot to connect your Apple Smart Cover, if you have one. I appreciate the large slots and spaces on the sides of the case to insert any plugs. (Some cases have too tight a fit and plugs like the Apple iPad Camera Connection kit can’t attach properly. This results in the iPad having to be removed from the case before the plug can be used.)
The inside of the shell is a rubberized material that creates a good suction fit to hold the iPad in place. Don’t attach the stand until you have the iPad secured in the case. I found that the insertion process worked better when the large space at the back was open. It probably helped to create the proper suction, allowing the air to be squeezed out from behind the iPad. This also explains the purpose of all those holes on the rubberized interior of the case.
It is advisable to check that the iPad is securely attached. This is my only concern with this case. Most cases wrap around not only the back and sides but also a bit on the front so that the iPad can’t slip out of the case. There is no overlapping front face grip. I can understand why it was built this way. This construction allows the Smart Cover to lie flat over the face. To remove any doubts I had about the suction hold of the case, I have held the iPad upside down over a couch and tried to shake it free. The suction has held every time I tried to get it to fall free. I guess if you are worried about how secure it is, you can periodically test the grip.
The GripStand’s handle can be swiveled 360° and positioned at virtually any angle for viewing and typing needs. It kind of locks in the four main positions (landscape or portrait), which is convenient when using it as a stand. The GripStand is quite stiff when you attempt to change the viewing angle. This means that whatever angle you decide on, the iPad stays right there. So many other cases I have tried were either limited in the angles or tended to slip and change their angle as you touched and tapped away at them. This is why the GripStand is a great aid for using and typing on the iPad.
It is also a highly effective one hand grip so you can use your iPad 2 while standing or walking. I was surprised at how handy this was. It was a lot easier carrying the iPad while holding on to the base and it kept my oily hands away from the screen. The handle can be rotated to use as a hook to hang your iPad 2 on a wall. The handle allows you to carry the iPad 2 like a briefcase.05/21/15