To track whether the dishes in your washer are clean, use a wet erase marker to write “Dirty” or make …
At DonorsChoose you can be a philanthropist for ten bucks (or more). Go to the site and choose from among …
These Spectra/Kevlar gloves are used in the restaurant industry to defend against knife and mandolin cuts, as well as handling trash that may have protruding bits of glass and fish bones. I read about them in a cooking magazine, and bought one glove after cutting myself on a mandolin.
find the glove allows for ample movement and dexterity. It’s definitely flexible enough to carve with and feels a lot like wearing a winter Thinsulate glove. These days, when I use the mandolin, I find I can get in closer for a few extra slices. Although the glove hits the blade, my hand’s always safe. My gloved hand has even survived an errant cleaver (Fortunately I didn’t hit myself not too hard).
I’ve used mine about five times a month for the past three years. I’ve washed it and haven’t noticed any deterioration, though it does feel a little stiffer at first. Bonus: The weave is much tighter than with a pricier chain mail glove, so it also seems better for guarding against knife pokes. — Steve Golden
If you enjoy carving wood or just working with sharp tools, this glove can save you countless boxes of band-aids as well as a nice chunk of change – and gas money — from all the trips to the local emergency room for stitches. The chain mail (just like the type medieval knights and shark divers use) is a great safety tool that not only keeps you from slicing your hand open, but also makes you feel pretty tough while wearing it. Much more comfortable and easier to work with than any heavily-padded safety glove. These are similar to the butcher’s gloves and also those advertised for shucking oysters, but they’re half the price. — Josh G.
I was left about a dozen pairs of these rubber dipped kevlar gloves by the former owner of my house. Good thing, too! I’ve removed 4 crabapple trees, buried electrical cable, dug up hundreds of ferns, trimmed pine trees and done yardwork for the whole neighborhood. And these gloves look exactly like they did on day one.
That’s not to say they’re pretty, because they’re surely not, but they can stand up to all kinds of abuse and not seem any worse for the wear. The rubber is flexible enough to grip small objects like nails and screws yet plenty sturdy for sharp thorns and other pokey things. The yellow kevlar mesh on the top makes the gloves feel light and breathable. The gloves pull on and off very easily and they hug the wrists so not much dirt gets inside of them.
The colors may not be pretty but they help make them more visible when you’re looking for a pair in your crowded garage or basement. I gave away a few pairs before I realized how valuable they are. Now I just tell other people about them! — Matt O’Hara
The quest for warm hands in a cold demanding environment is a long and frustrating one. The general rule is it takes carrying three pairs of gloves to have one dry pair on your hands. I have not found that to be true with Glacier Gloves, which is hands down the best glove I have ever used. The 824BK is 2mm neoprene lined with a thin fleece nap on the inside; the two layers feel fused together somehow (not sewn or glued), which gives them a comfortable fit, allows easy on and off, and provides excellent dexterity.
I have bought several different waterproof gloves from various makers, including the previously-reviewed SealSkinz, other neoprene rubber gloves and a pair of thinsulate-filled gloves with a “waterproof” exterior. Some are OK and allow for moderate dexterity, but I find my hands get cold after working in the water and I then have to switch out to a different glove — and if you have to put some of them on with wet hands, forget it.
With the Glacier Glove, the Velcro strap secures them to your wrist, minimizes heat loss through the cuff, and minimizes water entry through the cuff. I find the cuff, when tucked inside the sleeve of your coat, also prevents rain water from running down your jacket and into the glove from the topside.
My hunting partner bought a pair years ago and was quick to brag about how warm and dry his hands were whenever we complained about how cold and wet ours were. I now wear mine while duck hunting and will generally keep my left glove on all day long, and swap between a thin shooter’s glove and my Glacier on the right (that’s just my preference; other hunters use them on both hands with no complaints). While I’ve only used these gloves while hunting, I would recommend them for any cold and wet environment. — Max Tullos
Youngstown Waterproof Winter Plus Work Gloves
I received these gloves about six years ago from my wife, in one of those rare intersections of need and availability. It was Christmastime and I needed to shovel, so I broke these out and went to work. I never gave them a second thought, until I realized I had done a fair amount of ice chopping, opening the garage, and manipulating other things without ever removing the gloves. This is somewhat of a rarity for me since I usually cannot work in gloves. Fast-forward to spring, and I used them to protect my hands when chopping and stacking wood; working on the car; working in the garage. I *far extended* the prescribed use of these, despite the fact that they were winter gloves and waterproof. In a pinch, I’ve even used them when moving flaming logs in an outdoor fire pit.
A short word about the waterproofing: I tend to agree with other owners in that these aren’t strictly waterproof. If I was a long-line fisherman I may not use them. However, as a north Jersey resident who works on his cars, shovels snow, and builds snowmen for the kids, I can attest to their warmth and utility in the cold and wet.
With respect to function, they fit my slightly larger hand size well, and the back strap does seal in against cold and snow. The palms and fingers are textured and I am able to pick up bolts, thread nuts, small tools and sockets, and work with wrenches rather easily. The fingertips are boxed, not tapered, but in some ways the fingertips work to my advantage in picking up things on the ground.
When they get *really* dirty, you can toss them in the wash. The construction is such that the inner glove liner is not sewn to the shell, but it is a huge pain in the posterior to re-fit the glove components back to original fit. I used a wooden spoon and patience to eventually restore it to normal comfort. — Christopher Wanko
The problem is keeping my work gloves with me at all times. I’ve tried putting grommets in the gloves and clipping them with a carabiner, but this isn’t as easy as it sounds and is a pain to do all over again when a glove gets lost or worn out.
Years ago I saw someone out there with a large battery-terminal clip holding his gloves, and I’ve been searching for a similar clip for years with no success. This year, though, I found these Glove Guards.
The clips have a “breakaway” feature, so that you won’t be trapped if your gloves get caught in machinery or something. This caused me some worry when my gloves got caught in the truck door and seemed to break away too easily but the two pieces of the clip reconnected with ease, and have continued to hold firm ever since.
At less than $5 apiece, I can wholeheartedly recommend getting several if keeping your gloves handy is important to you. — Bill Emmack
© 2022
